Dell S-Series (FTOS) OS10 Image Upgrade


I keep having to look this up, so I’m just going to write it here quick.

  1. Download firmware (for some dumb reason, still on https://wwwforce10networks.com)
  2. Copy to usb stick or tftp server
  3. Do the upgrade
OS10# copy run start
(if tftp) OS10# image download tftp://filename.bin
OS10# image install usb://filename.bin

OS10# show image status
Image Upgrade State:     install
==================================================
File Transfer State:     idle
--------------------------------------------------
  State Detail:          No download information available
  Task Start:            0000-00-00T00:00:00Z
  Task End:              0000-00-00T00:00:00Z
  Transfer Progress:     0 %
  Transfer Bytes:        0 bytes
  File Size:             0 bytes
  Transfer Rate:         0 kbps
                         
Installation State:      install
--------------------------------------------------
  State Detail:          In progress: Configuring root filesystem
  Task Start:            2018-11-06T21:55:30Z
  Task End:              0000-00-00T00:00:00Z
OS10# show image status
Image Upgrade State:     install
==================================================
File Transfer State:     idle
--------------------------------------------------
  State Detail:          No download information available
  Task Start:            0000-00-00T00:00:00Z
  Task End:              0000-00-00T00:00:00Z
  Transfer Progress:     0 %
  Transfer Bytes:        0 bytes
  File Size:             0 bytes
  Transfer Rate:         0 kbps
                         
Installation State:      install
--------------------------------------------------
  State Detail:          In progress: Installing OS10 packages
  Task Start:            2018-11-06T21:55:30Z
  Task End:              0000-00-00T00:00:00Z
  
OS10# show boot
Current system image information:
===================================
Type      Boot Type      Active                   Standby                 Next-Boot
-----------------------------------------------------------------------------------
Node-id 1 Flash Boot     [A] 10.4.0E(R3)         [B] 10.4.1.2            [A] active     
OS10# boot system standby
OS10# show boot
Current system image information:
===================================
Type      Boot Type      Active                   Standby                 Next-Boot
-----------------------------------------------------------------------------------
Node-id 1 Flash Boot     [A] 10.4.0E(R3)         [B] 10.4.1.2            [B] standby    
OS10# copy run start
OS10# reload

Proceed to reboot the system? [confirm yes/no]:yes

### system reboots

show ver
OS10# show version
Dell EMC Networking OS10-Enterprise
Copyright (c) 1999-2018 by Dell Inc. All Rights Reserved.
OS Version: 10.4.1.2
Build Version: 10.4.1.2.524
Build Time: 2018-09-26T17:20:01-0700
System Type: S4112F-ON
Architecture: x86_64
Up Time: 00:02:40
OS10#